Download Innjoo Stock ROMS [All Models] [Flash & Unbrick]

Innjoo Stock ROMS for All models is now available, and you can easily flash your android to default. However, if your Innjoo device is bricked, with the help of these stock ROMS, it will be easy for you to restore back to Stock android and gain warranty and security trust for your device.


Most android users are fund of installing custom ROMS on their device, and some of them are ignorant of the risk. There are some custom roms that might not be compatible with our devices, and without developer’s permission or FAQ, you might end up flashing the wrong custom rom which ends up bricking your device or you might even get stuck at bootloop.

With the help of stock roms, you can easily unbrick your bricked Innjoo device, outside that, if you wish to restore your device back to normal and gain access to OTA, then flashing to stock rom would help. You can’t update your smartphone via OTA when it’s rooted with custom rom or firmware installed in it. You can only gain access if only your device is on stock android.


In this guide, I’ll brief you on how to install Stock ROM/Firmware on all Innjoo phones.

Requirements:
Download Links to Innjoo Stock ROMS for All Models

1.       Innjoo i1

2.       Innjoo i1s

3.       Innjoo i2

4.       Innjoo i2s

5.       Innjoo Note

6.       Innjoo Note E

7.       Innjoo i1k

8.       Innjoo Note Pro

9.       Innjoo One

10.   Innjoo Fire

13.   Innjoo Halo

List to be updated with time….

How to Install or Flash Stock ROMS on Innjoo Devices

Step 1: First download the stock rom file from, and then extract the file to the desktop screen of your computer.

Step 2: Now, power off your device, and remove the battery if possible.

Step 3: Next, download the SP Flash tool, and extract the files to your computer. You should get the following files as seen below, after extraction.


Step 4: From the extracted files, open Flash_tool.exe

Step 5: Once the flash tool is launched, then click on the download/upgrade tab and click on scatter loading button

Step 6: Now, locate the “MTXXXX_Android_Scatter.txt” file (depending on your device model), from the firmware files you extracted to your desktop.

Step 7: After that, click download to begin flashing process.

Step 8: Immediately, connect your device (without battery if possible) to your computer via USB cable, and press Volume Down or up key, so it would be detected easily by your computer.

Step 9: The Flashing process would be in progress, and a Green button would appear once the process is completed.

That’s it. Your Innjoo device is now restored back to stock android, and you’ll begin to enjoy your device as it was when you first purchased it. If you’ve any difficulty flashing the rom on your device, please do let me know. Don’t forget to share this guide with your friends.

Related Posts

Download Innjoo Stock ROMS [All Models] [Flash & Unbrick]
4/ 5
Oleh